Eccentric Rings / Zentrierringe

Discussions about brakes, rims and tyres (public)
Discussions à propos des freins, des jantes et des pneus (public)

Moderators: Committee, Former-Committee

Post Reply
FrancisB-67
Former committee member
Posts: 7
Joined: 14/03/2008 23:08:00

Eccentric Rings / Zentrierringe

Post by FrancisB-67 » 20/05/2011 6:45:17

Hi Guys
After long research I at last found the reason, why it was impossible to find the right wheel balance.. The eccentric rings don't fit 100% on the hub.. They have +- 0,8 mm space.. Although the rings are the right ones for Autec / Subaru ( 70 - 56,1 mm), I think if I could find other ones , maybe 70 to 55, 4 mm or 55,3 mm, the problem will be solved.
I've put a very thin metall blade between the hub and the rings, and it works fine now.
Does anybody know where I can find rings with the dimensions ahead ?
I've searched the whole web, put found none with those sizes...
Other suggestions ?
Thanks

User avatar
Jean-PierreR-71
President
Posts: 2053
Joined: 23/12/2007 21:10:06
Location: Bascharage (L)
Contact:

Post by Jean-PierreR-71 » 20/05/2011 10:47:06

Have them made to size might be the way to go maybe ?
Jean-Pierre Rasquin / Webmaster & Chairman / Impreza Club Luxembourg / www.impreza-club.lu

Post Reply