Page 1 of 1
Project Impreza P1
Posted: 04/09/2011 23:32:26
by RenzoW-74
Well i already been started with the project 4 weeks ago, but never started a topic on P1woc.
As some ppl know I bought a donor STI from the UK with some minor front damage.
The car has run 36K miles and has PPP package with 320 BHP, DCCD etc.
Here are some pictures of the car, made on the way back home before entering the train to Calais.
Posted: 04/09/2011 23:34:32
by RenzoW-74
4 Weeks ago we collected the P1 at Jdels place.
The car was completely stripped down to the bone and a lot of parts where already sold.
So I’m missing some things like the original fog lights that go in the front bumper.
I hope to find a OEM set somewhere at P1woc hopefully
(some pics at collection day)
Here is a scan of the Dutch DVLA(RDW) papers.
The car is registered as a Impreza P1 and she is the only one with that P1 on the papers.
Posted: 04/09/2011 23:36:23
by RenzoW-74
Next update, the heating stuff
The heaterbox with climate parts and fan system is fitted.
We had to relocate some mounting brackets to fit it nicely into the P1
The P1 heaterbox is slightly ofcenter mounted, the STI one is exactly located in the middle.
Some pictures of the job
Fitted the STI beam back in the car to testfit the top part of the dashboard
Posted: 04/09/2011 23:39:56
by RenzoW-74
The STI heaterbox is in correct place so we made the holes for the cooling pipes and airco Lines.
So ive cutted some metal out of the STI for that and welded it in the P1.
Also cutted a hole for the 70mm rubber of the engine wirings and welded that also in place at the P1.
After that i have sprayed it in with zinc compound
Everything is in 2 layers of primer and need to dry for a few days
I have decided to respray the entire engine bay in 74F and after that refit the wirings etc.ink
After the first paint job we had to wait, so we took the P1 subframe from the car.
This will be replaced with the rearsubframe of the MY’05 STI.
The pictures:
Posted: 04/09/2011 23:42:16
by RenzoW-74
Posted: 04/09/2011 23:45:03
by RenzoW-74
Posted: 04/09/2011 23:47:05
by RenzoW-74
We are a bit further now,
Due some problems with my back, I’m at home now for a few weeks.
Hopefully I can go back to work in a few weeks
So sorting out some things for the P1.
Because I’m going to use the STI loom, i would like to have a Blackface cluster with the defi-style sweep
I found one at Ebay.co.uk and bought it.
Here are some pics with the difference between the two types of STI clusters
For those who don’t know what a blackface dial ishttp://
www.youtube.com/watch?v=XY0uUjJ4AGE
And my front bumper is resprayed.
The previous owner started sanding the thing but it was done on a rude way, so they had to clean the whole bumper and started all over again.
Here are some pics of the result.
Posted: 04/09/2011 23:51:30
by RenzoW-74
Posted: 04/09/2011 23:55:10
by RenzoW-74
Posted: 04/09/2011 23:57:59
by RenzoW-74
I also took some time to undo the bottom of the car of sand, and some rusty points.
After that i putted the whole bottom in a bitume body coating.
And when that was dry fitted the new suspension parts.
Posted: 05/09/2011 0:00:13
by RenzoW-74
I bought a new top mount inntercooler, he is "a bit"bigger then a standard WRX TMIC lol.
But it will fit in with some minor adjustments on the OEM brackets.
OEM TMIC
BIG TMIC
Posted: 05/09/2011 0:00:51
by RenzoW-74
also ordered a new seat for the P1, I'm thinking to mount it straight on the floor of the car. Like WRC style.
Posted: 05/09/2011 0:02:05
by RenzoW-74
Last week , i had a lot of stuff done with my mate who help me out a lot.
The car started and i was pretty happy.
a small footage of the first startup(engine had already run and filled her up etc), but for a small film started again
http://www.youtube.com/watch?v=xZ87_...layer_embedded
Posted: 05/09/2011 0:03:29
by RenzoW-74
Also bought a set of STI Genome 60mm Defi gauges.
Also made a small footage, a walk around the P1.
http://www.youtube.com/watch?v=w3i72...layer_embedded
Now im sorting out the wirings to connect the door wrings into the STI loom.
So if someone have the electrical wiring manuals of the P1 / STI type R V5/6, I'm going to be very happy.
Posted: 12/09/2011 21:47:50
by YvesB-80
Awesome! Was looking for them since a long time but gave up in the end.....
Posted: 12/09/2011 22:56:48
by RenzoW-74
You mean de STI Genome Gauges?
They are very very rare and very expensive indeed.
But they are so sexy
, maybe I will sell them next year and want a set of red BF Defi's matching my JDM STI cluster.
Posted: 13/09/2011 2:14:00
by YvesB-80
Yes, that's exactly right. I could have bought a set of used ones but they included the Water Temp gauge which I would have had to replace by either Oil Temp or Pressure. If you sell yours some day, please let me know....